Skip to content

Xiaomi Qin 1s+

Source:targets/xiaomi-qin-1s-plus

  • Target: xiaomi-qin-1s-plus
  • Hardware code: not established
  • Platform: Unisoc SC9820E
  • Display: 240×320
  • Configured build profiles: default, microsd-root

Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.

FPLinux uses both Cortex-A53 cores with a 32-bit ARM kernel and 512 MiB of RAM. The CPU starts at 1.3 GHz and supports manual switching to 768 MHz without changing voltage; see CPU speed. Use the default RAM profile or the microsd-root system-card profile.

Each status applies to this phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.

Platform: Unisoc SC9820E.

Startup and access

FeatureStock firmwareFPLinuxDetails
RAM bootStock: —FPLinux: VerifiedThe default RAM profile reaches an authenticated Linux session from a Linux PC. Builds and standalone archives include the loaders. The first launch reads and prepares selected sound files; the next launch reuses them and starts Linux. No pre-existing full backup is needed. USB loading and SSH from Windows have not been verified with this phone. Use USB power; operation with a connected battery is not verified.
Boot without the USB loaderStock: —FPLinux: UnsupportedEvery start requires the PC's USB loader.
USB networkingStock: —FPLinux: VerifiedUSB-NCM works in the default RAM profile.
SSH accessStock: —FPLinux: VerifiedAuthenticated SSH works over the local USB connection in the default RAM profile.
File transferStock: —FPLinux: VerifiedSSH upload and pull verify transferred file contents in the default RAM profile.
USB host modeHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Display and input

FeatureStock firmwareFPLinuxDetails
Local terminalStock: —FPLinux: PartialThe direct-display terminal works at 240×320, including after blanking and unblanking. Tear-free output across all applications and complete physical keypad input are not verified.
LCD backlightHardware: presentStock: AvailableFPLinux: PartialThe native sprd_backlight device and logical brightness get/set work. Level 1 visibly dims the display relative to the boot default 7, and restoring 7 works. Other levels and brightness calibration are not verified.
Keypad backlightHardware: presentStock: UnknownFPLinux: PartialThe :kbd_backlight LED supports manual levels 0–255 and the default input-events trigger with a five-second timeout, including grabbed input devices. The upper key row lights visibly; complete physical keypad input remains untested.
Host keyboard bridgeStock: —FPLinux: UnsupportedUse SSH for PC input; forwarding a physical PC keyboard is unavailable for this target.
Indicator LEDsHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
FlashlightHardware: unknownStock: UnknownFPLinux: UnsupportedFPLinux provides no flashlight control.
GPU renderingHardware: presentStock: —FPLinux: PartialARMADA and TyrQuake support GPU rendering on the Mali-T820 MC1 through Panfrost and Mesa. Offscreen rendering resumes after s2idle in the RAM profile. Intermittent resets to BootROM under application load remain unresolved.

Audio

FeatureStock firmwareFPLinuxDetails
Headphone audioHardware: unknownStock: UnknownFPLinux: UnsupportedWired-headphone playback and automatic routing are unsupported.
Speaker audioHardware: presentStock: AvailableFPLinux: PartialStereo S16_LE playback mixes both channels into the rear speaker. Default playback uses the phone's prepared equalizer and level-control settings at 44.1 kHz; direct 48 kHz playback bypasses that processing. Sample-rate conversion, audible output at the default Master level 1, mute at 0, stop/restart and switching between playback and recording work. Playback and capture are mutually exclusive. Loudness and playback quality are uncalibrated; stability under combined application and speaker load is not fully verified.
FM radioHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Built-in microphoneHardware: presentStock: AvailableFPLinux: PartialMono S16_LE at 48 kHz records acoustic input, including during display updates. Preparation takes about one second. Stop, restart and buffer-overrun recovery work; speech quality and sensitivity are uncalibrated.
Wired-headset microphoneHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Automatic audio routingStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Bluetooth and networks

FeatureStock firmwareFPLinuxDetails
SIM hot swapStock: UnknownFPLinux: UnsupportedFPLinux does not support cellular service or SIM cards.
Wi-FiHardware: presentStock: AvailableFPLinux: UnsupportedUnsupported and off by default. Optional prepared radio data does not establish a working connection.
Bluetooth pairingStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth file transfer (OPP)Stock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth Internet (PAN)Stock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth audio to a Linux PCStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth headset audio (A2DP)Stock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth keyboard inputStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth mouse inputStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Mobile callsStock: AvailableFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
SMSStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Mobile dataStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Infrared remote controlHardware: presentStock: AvailableFPLinux: UnsupportedFPLinux provides no infrared remote-control path.

Camera and images

FeatureStock firmwareFPLinuxDetails
AP DMAengineHardware: presentStock: —FPLinux: PartialMemory-copy DMA supports unaligned and multi-fragment transfers. Display-output DMA works after s2idle. RX DMA is not verified.
Hardware image rotationHardware: unknownStock: —FPLinux: UnsupportedFPLinux provides no hardware image-rotation path on this phone.
Hardware JPEG engineHardware: unknownStock: —FPLinux: UnsupportedFPLinux provides no hardware JPEG path on this phone.
Native image presentationHardware: presentStock: —FPLinux: PartialCPU-converted RGB565 grayscale frames display at 240×320. Native NV16 conversion in display hardware is not verified.
CameraHardware: absentStock: UnavailableFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Storage

FeatureStock firmwareFPLinuxDetails
microSD data cardHardware: presentStock: AvailableFPLinux: PartialA 16 GB ext4 data card supports reads, writes and persistence across a power cycle after sync and unmount. FAT32 data-file use is not verified. Hot insertion/removal is unverified; insert before boot and keep installed during the supported session.
microSD hot swapStock: UnknownFPLinux: Not testedCard detection is present, but hot insertion/removal is unverified. Insert before boot and keep installed during the supported session.
microSD system cardStock: —FPLinux: Verifiedmicrosd-root loads Linux over USB and mounts ext4 on the card as /. The root grows to fill a 16 GB card; installed packages and files persist after a cold start. Each start requires the PC loader. Keep the card installed and remount the root read-only before removing power.
Internal phone storageHardware: presentStock: —FPLinux: PartialThe eMMC user area and its partitions can be read. Sound preparation reads selected files with the storage protected against writes. Writing, restoring, boot-partition access, RPMB and a full-storage backup command are unsupported.

Power and sensors

FeatureStock firmwareFPLinuxDetails
CPU clock reportingStock: —FPLinux: VerifiedNative cpufreq reports the shared CPU clock setting in kHz through cpuinfo_cur_freq. The default is 1300000 kHz.
Manual CPU frequency selectionStock: —FPLinux: VerifiedBoth cores share manual 1300/768 MHz selection without voltage changes. Load, microphone capture and CPU1 offline/online work at 768 MHz; restoration to 1300 MHz works. Automatic scaling and CPU thermal protection are unavailable.
Charger statusHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Battery telemetryHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
SoC temperatureHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Auxiliary ADCHardware: presentStock: —FPLinux: PartialCalibrated board-thermistor and supply-voltage readings are available; board temperature is exposed through the thermal interface. Absolute accuracy and battery telemetry are not verified.
Real-time clockHardware: presentStock: —FPLinux: PartialTime read/set, one-shot alarms while running and RTC wake from s2idle work. Long-term retention without power and alarm wake from power-off are not verified. The host tries to set system time at session startup; reconnecting does not reset it.
Other battery functionsHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
VibrationHardware: presentStock: AvailableFPLinux: VerifiedBinary FF_RUMBLE effects with a five-second automatic cutoff.
Power-offStock: —FPLinux: PartialSoftware poweroff stops Linux and turns the display off; USB can still supply power afterwards. Power-off with a connected battery and physical power-key behavior are not verified.
SuspendStock: —FPLinux: Partials2idle and RTC alarm wake work on USB power in default and microsd-root. Close audio streams first. Unmount data-card filesystems in the RAM profile; the ext4 system root may remain read-write in microsd-root. Direct-display output returns in both profiles; graphical-session resume is not verified. Deep suspend is unsupported; physical-key wake, battery-powered sleep and other mounted-card filesystems are not verified.
RebootStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Applications

FeatureStock firmwareFPLinuxDetails
Image rotationStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
JPEG codec and scalingStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Native image presentationStock: —FPLinux: PartialUse --mode cpu-rgb565: a 240×320 grayscale frame displays and normal exit restores the terminal. Native NV16 output is not verified.
FPLinux: ARMADAStock: —FPLinux: PartialSoftware and GPU rendering are available. Exit restores the previous display state, LCD brightness and keypad light and stops vibration. Physical soft-key operation is not verified.
Brightness controlStock: —FPLinux: Not testedThe brightness CLI get/set works; physical keypad use of the application is not tested.
TyrQuakeStock: —FPLinux: PartialTyrQuake can use game data on an ext4 microSD card or in RAM, with software or GPU rendering. Complete physical keypad operation is not verified. There is no game sound.
FFmpeg software video decodingStock: —FPLinux: PartialCPU decoding works for tested 240×320 H.264 Constrained Baseline and MPEG-4 Simple clips and 176×144 H.263 clips. The package has no video playback window or hardware video acceleration.

Use a Linux PC and the shared build, run and connection instructions, or a standalone archive for Linux or Windows. The build supplies the three RAM-loading stages. No separate loader files are needed. The first launch reads the phone’s sound settings from eMMC and saves them on your PC; follow phone-data preparation, then run the same launcher again. USB loading and SSH from Windows have not been verified with this phone.

Use USB power. Intermittent resets to BootROM under application load are unresolved. Operation with a connected battery, charging and wired headsets are not verified. Every cold start requires the PC loader; internal eMMC is available only for reading.

Sound preparation needs the original audio_para, audio_hw.xml, tiny_hw.xml and codec_pga.xml settings, plus the vbc_eq profile created by the phone’s original system. The launcher selects these files automatically. It stops with an error if a required file is missing or cannot be used; it does not replace it with guessed settings. A full eMMC backup is not required or created by this procedure.

Wi-Fi and Bluetooth are unsupported and stay off by default. Radio data is optional and is not needed for the supported screen, audio, application, storage or sleep functions. To prepare it from five original files saved from this same phone, use Prepare data from original files with these exact names:

Original Contents
wcnmodem-firmware.bin The 1540096-byte radio firmware image, without partition padding
system-connectivity_configure.ini The complete system radio configuration
system-connectivity_calibration.ini The complete system radio calibration
wcn-connectivity_configure.ini The complete WCN radio configuration
wcn-connectivity_calibration.ini The complete WCN radio calibration

FPLinux does not supply or automatically extract these radio files. A whole storage dump or partition is not an accepted radio firmware image. Preparation retains both configuration/calibration pairs. A fresh RAM launch includes the imported radio data; a microSD system card must be rebuilt to include it. Keep images and archives containing this phone’s data private. Preparing the data does not enable Wi-Fi or Bluetooth.

Start the launcher from your ZIP, or run ./fplinux run xiaomi-qin-1s-plus from a source checkout. Wait until it asks for the phone. Power the phone off, hold the call key, then connect USB while keeping the key pressed.

The RGB565 display works at its native 240×320 size, including after blanking and unblanking. Tear-free output across all applications is not verified. Complete physical keypad input has not been tested. Use SSH for command input; forwarding a physical PC keyboard to the phone is unsupported.

The standard image starts the Weston/Wayland phone interface. Native output from Home, the application catalog, Notes and Settings works with the Pixman renderer and with the Panfrost GL renderer. These display results do not establish complete physical keypad support.

The Mali-T820 MC1 GPU supports GPU rendering in ARMADA and TyrQuake.

Use Screen brightness to read or change the logical level from 0 to 10. The default is 7; the graphical session can restore its saved selection. Level 1 visibly dims the display, and restoring 7 works; other levels are not verified. For diagnostics, the native backlight is sprd_backlight with a raw range of 0 to 255.

The keypad light supports manual settings from 0 to 255 and automatic lighting after input; see Keypad light. Visible illumination of the upper key row works; complete physical keypad input remains untested.

The vibration motor supports on/off force-feedback effects with a five-second automatic cutoff. Vibration strength is fixed.

The built-in microphone supports mono S16_LE recording at 48 kHz using the shared recording command. Recording starts after about one second. Speech quality and sensitivity are uncalibrated.

The rear speaker plays both channels of a stereo file. Default playback uses the prepared sound profile at 44.1 kHz; direct 48 kHz playback bypasses its equalizer and level control. Use the Qin controls in Volume. Loudness and playback quality are uncalibrated, and stability under combined application and speaker load is not fully verified. Stop playback before recording, and stop recording before playback. Wired-headphone playback, wired-headset recording and automatic audio routing are unsupported.

ARMADA and TyrQuake support renderer selection. Use the direct-display procedure with the graphical session stopped.

ARMADA supports software and GPU rendering. Exit and termination restore its previous direct-display state, LCD brightness and keypad-light trigger and stop vibration. Physical soft-key operation is not verified.

TyrQuake can use game data on an ext4 microSD data card or in RAM. Software and GPU rendering are available. Complete physical keypad operation is not verified. There is no game sound.

Insert a microSD card before boot and keep it installed throughout the powered session; hot insertion and removal are unverified. A 16 GB ext4 card supports persistent files. FAT32 data-file use is not verified. The microsd-root profile uses ext4 on the card as / and preserves installed packages and files across cold starts. Follow the shared system-card procedure. Files in RAM, including /tmp, disappear when power is removed.

Before removing power in the RAM profile, unmount data cards. With a system card, follow shutdown on USB power, including the read-only root check. Software poweroff stops Linux and turns the display off; USB can still supply power afterwards. Power-off with a connected battery and the physical power-key action are not verified. Reboot is unsupported. Every new Linux session requires the PC loader.

Suspend-to-idle (s2idle) and RTC alarm wake work on USB power in both profiles. Close playback and recording first. In the RAM profile, unmount data-card filesystems; in microsd-root, the ext4 system root can remain mounted read-write. Keep the card installed and use the shared sleep and clock alarm commands. Graphical-session resume is not verified. Deep suspend is unsupported. Wake through physical keys, battery-powered sleep and resume with other mounted card filesystems are not verified.

The RTC supports reading and setting time, one-shot alarms while Linux is running and wake from s2idle. Long-term clock retention without power and alarm wake from power-off are not verified. Follow the shared clock instructions; automatic system-time initialization from the RTC is disabled.

The temperature reading comes from a board thermistor rather than the CPU. Board-sensor and supply-voltage readings are available through the sensor interfaces. Absolute measurement accuracy, battery telemetry and charging are not verified.

Internal eMMC is read-only. Phone-data preparation reads only the selected sound files; it does not erase, restore or write the original system or user data. FPLinux does not expose the eMMC boot partitions or RPMB.

Wi-Fi, Bluetooth, mobile service, camera capture and FM radio are unsupported.