Nokia 3210 4G (TA-1618)
Source:targets/nokia-ta1618
- Target:
nokia-ta1618 - Hardware code: TA-1618
- Platform: Unisoc UMS9117
- Display: 240×320
- Configured build profiles:
default,microsd-uboot
Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.
Support checklist
Section titled “Support checklist”Each status applies to this exact phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.
Platform: Unisoc UMS9117.
Startup and access
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| RAM boot | Stock: — | FPLinux: Verified | Verified on this phone. |
| Boot without the USB loader | Stock: — | FPLinux: Unsupported | The RAM bootstrap must be loaded over USB for every Linux boot. |
| USB networking | Stock: — | FPLinux: Verified | Verified on this phone. |
| SSH access | Stock: — | FPLinux: Verified | Verified on this phone. |
| File transfer | Stock: — | FPLinux: Verified | RAM and a writable mounted microSD are valid destinations. |
| USB host modeHardware: unknown | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Display and input
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Local terminal | Stock: — | FPLinux: Verified | 240×320 graphical terminal with phone-keypad input; RTC wake preserves the shell in USB-powered RAM sessions. Operation without USB power is untested. |
| LCD backlightHardware: present | Stock: Available | FPLinux: Partial | System scale 0…10, raw range 0…20; visible spacing of the new intermediate levels is not fully verified. |
| Keypad backlightHardware: present | Stock: Unknown | FPLinux: Verified | Binary LED control plus a bounded key-press light. |
| Host keyboard bridge | Stock: — | FPLinux: Verified | Verified on this phone. |
| Indicator LEDsHardware: unknown | Stock: Unknown | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| FlashlightHardware: present | Stock: Available | FPLinux: Unsupported | FPLinux provides no flashlight control. |
| GPU renderingHardware: unknown | Stock: — | FPLinux: Unsupported | No FPLinux GPU rendering path on this phone. |
Audio
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Headphone audioHardware: present | Stock: Available | FPLinux: Verified | Stereo S16_LE playback with volume levels, equalizer and automatic level control from this phone's saved audio profile. |
| Speaker audioHardware: present | Stock: Available | FPLinux: Verified | One speaker above the display, alone or with headphones. Volume levels, equalizer and automatic level control come from this phone's saved audio profile. |
| FM radioHardware: present | Stock: Available | FPLinux: Verified | RAM profile: scan and headphone/speaker playback with EQ/ALC off. EQ-on playback checked on headphones only; speaker EQ and microSD FM not tested. |
| Built-in microphoneHardware: present | Stock: Available | FPLinux: Verified | Mono 48-kHz capture can run alongside 48-kHz stereo playback. |
| Wired-headset microphoneHardware: present | Stock: Unknown | FPLinux: Verified | Original wired headset; select the Headset source before recording. |
| Automatic audio routing | Stock: Unknown | FPLinux: Verified | Insert/remove selects the playback output in USB-powered RAM sessions; switching a playing signal can click. |
Bluetooth and networks
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| SIM hot swap | Stock: UnknownThe normal stock installation procedure powers the phone off; powered replacement is unconfirmed. | FPLinux: Unsupported | FPLinux does not support cellular service or SIM cards. |
| Wi-FiHardware: unknown | Stock: UnavailableStock Wi-Fi connectivity is unavailable; physical radio presence remains unknown. | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| Bluetooth pairing | Stock: Available | FPLinux: Verified | BR/EDR pairing in RAM and microSD profiles. |
| Bluetooth file transfer (OPP) | Stock: Unknown | FPLinux: Verified | Bidirectional OPP in RAM and microSD profiles. |
| Bluetooth Internet (PAN) | Stock: — | FPLinux: Verified | PAN Internet in RAM and microSD profiles. |
| Bluetooth audio to a Linux PC | Stock: — | FPLinux: Not tested | A2DP audio has not been tested on this phone. |
| Bluetooth headset audio (A2DP) | Stock: Available | FPLinux: Not tested | Physical Bluetooth headsets have not been tested. |
| Bluetooth keyboard input | Stock: — | FPLinux: Partial | LE input in the RAM profile; Classic input is untested. |
| Bluetooth mouse input | Stock: — | FPLinux: Partial | LE input in the RAM profile; Classic input is untested. |
| Mobile calls | Stock: Available | FPLinux: Unsupported | Calls are not supported in FPLinux. |
| SMS | Stock: Available | FPLinux: Unsupported | SMS is not supported in FPLinux. |
| Mobile data | Stock: Available | FPLinux: Unsupported | Mobile data is not supported in FPLinux. |
| Infrared remote controlHardware: unknown | Stock: Unknown | FPLinux: Unsupported | FPLinux provides no infrared remote-control path. |
Camera and images
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| AP DMAengineHardware: present | Stock: — | FPLinux: Partial | ROTA uses its fixed peripheral request; see platform limits. |
| Hardware image rotationHardware: present | Stock: — | FPLinux: Verified | Hardware rotation through V4L2 mem2mem, including RGB, grayscale and two-plane YUV. |
| Hardware JPEG engineHardware: present | Stock: — | FPLinux: Verified | Baseline JPEG decode, fixed JPEG encode geometries, and two fixed half-size NV16 scaler pairs. |
| Native image presentationHardware: present | Stock: — | FPLinux: Partial | Native 240×320 NV16 or CPU-converted RGB565 presentation through LCDC. Returns to the same terminal and shell; visible image fidelity is untested. |
| CameraHardware: present | Stock: Available | FPLinux: Verified | Rear GC2145; 800×600 and 1600×1200 NV16 through V4L2 in the RAM profile. Camera with a microSD system root is unverified. Sensor rotation is 270° counterclockwise; capture leaves pixels unchanged. Hardware JPEG accepts 1600×1200, but not 800×600. At 800×600, capture and JPEG queues may stay enabled and take turns; codec jobs need their own supported geometry. Capture continues through display updates, blanking and wake. Stop capture before hardware rotation. |
Storage
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| microSD data cardHardware: present | Stock: Available | FPLinux: Verified | FAT32 and ext4 read/write; unmounted hot-swap is available. |
| microSD hot swap | Stock: UnknownThe normal stock installation procedure powers the phone off; powered replacement is unconfirmed. | FPLinux: Verified | Unmount a data card before removal or insertion while Linux runs. A microSD system card must stay installed. |
| microSD system card | Stock: — | FPLinux: Verified | microSD FAT32 FIT plus writable ext4; the system card stays installed. |
| Internal phone storageHardware: present | Stock: — | FPLinux: Partial | Read-only raw NAND backup; no filesystem, writes or restore. |
Power and sensors
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| CPU clock reporting | Stock: — | FPLinux: Verified | Verified on this phone. |
| Manual CPU frequency selection | Stock: — | FPLinux: Verified | Switching between 768 MHz and 1 GHz works on this phone. |
| Charger statusHardware: present | Stock: — | FPLinux: Verified | Read-only external-input status. |
| Battery telemetryHardware: present | Stock: — | FPLinux: Partial | Voltage, signed current and a relative charge counter; absolute accuracy is unchecked. |
| SoC temperatureHardware: present | Stock: — | FPLinux: Partial | Calibrated reading without external accuracy validation. |
| Auxiliary ADCHardware: present | Stock: — | FPLinux: Partial | Five raw channels without physical-unit conversion. |
| Real-time clockHardware: present | Stock: — | FPLinux: Partial | Read/set time, one-shot alarms and RTC wake in both profiles, including after time correction; no update interrupts or alarm power-on. |
| Other battery functionsHardware: present | Stock: — | FPLinux: Unsupported | No level, battery temperature or charge control is provided. |
| VibrationHardware: present | Stock: Unknown | FPLinux: Verified | Binary FF_RUMBLE effects with a five-second automatic cutoff. |
| Power-off | Stock: — | FPLinux: Verified | Hold the red handset key for five seconds; external charger power must be absent. |
| Suspend | Stock: — | FPLinux: Verified | s2idle in both profiles, including Bluetooth, mounted data cards and card-backed swap; the red handset key and RTC alarms are wake sources. |
| Reboot | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Applications
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Image rotation | Stock: — | FPLinux: Verified | Included in the normal root filesystem; explicit CPU/ROTA selection and DRM preview. Returns to the same terminal and shell; visible image fidelity is untested. |
| JPEG codec and scaling | Stock: — | FPLinux: Verified | Included in the normal root filesystem; hardware decode, fixed encode, and fixed half-scaling. |
| Native image presentation | Stock: — | FPLinux: Partial | Included in the normal root filesystem; direct NV16 or CPU-converted RGB565 presentation. Returns to the same terminal and shell; visible image fidelity is untested. |
| FPLinux: ARMADA | Stock: — | FPLinux: Partial | Synchronizes the display, keypad light and vibrator. |
| Brightness control | Stock: — | FPLinux: Verified | Phone-keypad control of levels 0…10; level 0 turns the backlight off. |
| TyrQuake | Stock: — | FPLinux: Partial | Game data can use the supported microSD path. |
| FFmpeg software video decoding | Stock: — | FPLinux: Not tested | Optional CPU MPEG-4 Part 2, H.263 and H.264 decoding; device use is untested. |
Before you start
Section titled “Before you start”The RAM launcher prepares device data from this same handset for Bluetooth, FM radio and its audio settings. Do not substitute data from another phone.
Boot key
Section titled “Boot key”Start the launcher from your ZIP, or run ./fplinux run nokia-ta1618 from a source checkout. Wait until it asks for the phone. Power the phone off, hold *, then connect USB while keeping * pressed.
Controls
Section titled “Controls”The red handset key, Red, is the power key.
| Key | Action |
|---|---|
| Red, short press | Wakes the phone from suspend. |
| Red, held for five seconds | Powers the phone off; see Power. |
| 8 and the other keypad keys | Do not wake the phone. |
See the shared keypad bindings and application keys in Terminal.
Storage
Section titled “Storage”- microSD data cards can be FAT32 or ext4, read and write. You can remove and insert an unmounted card while Linux runs.
- The microSD system card works; it stays installed while Linux runs.
- File transfer from a PC can write to RAM or to a mounted writable microSD card.
Battery-only power-off works: disconnect USB and any charger, then hold Red for five seconds. FPLinux refuses to power off while external charger power is present. Power describes the interface.
End the session
Section titled “End the session”With a battery installed, use power-off with the red key. Without a battery, follow End the session safely for a RAM session, or USB-powered shutdown for a microSD system card.
Hardware details and limits
Section titled “Hardware details and limits”- Backlight:
/sys/class/backlight/ta1618-backlightwith the raw range 0–20, starting at 15. The spacing of the intermediate system brightness levels has not been fully checked; see Display and lights.