Skip to content

Maxvi K15n4G

Source:targets/maxvi-k15n-4g

  • Target: maxvi-k15n-4g
  • Hardware code: not established
  • Platform: Unisoc UMS9117
  • Display: 240×320
  • Configured build profiles: default

Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.

Each status applies to this exact phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.

Platform: Unisoc UMS9117.

Startup and access

FeatureStock firmwareFPLinuxDetails
RAM bootStock: —FPLinux: VerifiedVerified on this phone.
Boot without the USB loaderStock: —FPLinux: UnsupportedLoad the RAM bootstrap over USB for every Linux boot.
USB networkingStock: —FPLinux: VerifiedVerified on this phone.
SSH accessStock: —FPLinux: VerifiedVerified on this phone.
File transferStock: —FPLinux: VerifiedVerified on this phone.
USB host modeHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Display and input

FeatureStock firmwareFPLinuxDetails
Local terminalStock: —FPLinux: Verified240×320 graphical terminal with physical keypad, multi-tap typing, menus, Help, scrollback and one-shot modifier combinations.
LCD backlightHardware: presentStock: AvailableFPLinux: VerifiedSystem levels 0…10; level 0 turns the light off. Visible step spacing is unverified.
Keypad backlightHardware: presentStock: UnknownFPLinux: VerifiedLights on key presses and turns off after five seconds, including after wake.
Host keyboard bridgeStock: —FPLinux: Not testedThis function has not been tested on this phone.
Indicator LEDsHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
FlashlightHardware: presentStock: AvailableFPLinux: UnsupportedFPLinux provides no flashlight control.
GPU renderingHardware: unknownStock: —FPLinux: UnsupportedNo FPLinux GPU rendering path on this phone.

Audio

FeatureStock firmwareFPLinuxDetails
Headphone audioHardware: presentStock: AvailableFPLinux: PartialStereo PCM and per-channel mute with three-contact TRS headphones; jack detection works, but automatic output routing is not supported. TRRS compatibility is unverified.
Speaker audioHardware: presentStock: AvailableFPLinux: VerifiedPCM playback through the built-in speaker.
FM radioHardware: presentStock: AvailableFPLinux: PartialSeeking, tuning and headphone reception in the RAM profile, with or without the battery installed; speaker, stereo output and sensitivity are unverified.
Built-in microphoneHardware: presentStock: AvailableFPLinux: PartialBuilt-in microphone recording and replay, mono S16_LE at 48 kHz and duplex capture; acoustic response is unverified.
Wired-headset microphoneHardware: unknownStock: UnknownFPLinux: Not testedHeadset input is implemented; physical recording is untested.
Automatic audio routingStock: UnknownFPLinux: UnsupportedAutomatic playback routing is not included in this phone's image.

Bluetooth and networks

FeatureStock firmwareFPLinuxDetails
SIM hot swapStock: UnknownFPLinux: UnsupportedFPLinux does not support cellular service or SIM cards.
Wi-FiHardware: unknownStock: UnavailableStock Wi-Fi is listed as unavailable; physical radio presence remains unknown.FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth pairingStock: UnknownFPLinux: VerifiedPairing in the RAM profile.
Bluetooth file transfer (OPP)Stock: UnknownFPLinux: VerifiedOPP file transfer in the RAM profile.
Bluetooth Internet (PAN)Stock: —FPLinux: VerifiedPAN Internet in the RAM profile.
Bluetooth audio to a Linux PCStock: —FPLinux: VerifiedSBC playback to a Linux PC sink in the RAM profile; reconnect is supported.
Bluetooth headset audio (A2DP)Stock: AvailableFPLinux: Not testedPhysical Bluetooth headsets have not been tested.
Bluetooth keyboard inputStock: —FPLinux: Not testedPhysical Bluetooth keyboard input has not been tested.
Bluetooth mouse inputStock: —FPLinux: Not testedPhysical Bluetooth mouse input has not been tested.
Mobile callsStock: AvailableFPLinux: UnsupportedCalls are not supported in FPLinux.
SMSStock: UnknownFPLinux: UnsupportedSMS is not supported in FPLinux.
Mobile dataStock: AvailableFPLinux: UnsupportedMobile data is not supported in FPLinux.
Infrared remote controlHardware: unknownStock: UnknownFPLinux: UnsupportedFPLinux provides no infrared remote-control path.

Camera and images

FeatureStock firmwareFPLinuxDetails
AP DMAengineHardware: unknownStock: —FPLinux: Not testedThis function has not been tested on this phone.
Hardware image rotationHardware: unknownStock: —FPLinux: UnsupportedThe ROTA device is disabled; use the application's CPU engine.
Hardware JPEG engineHardware: presentStock: —FPLinux: PartialNative-size encoding, horizontal 4:2:2 half-resolution decoding and fixed half-scaling are available.
Native image presentationHardware: presentStock: —FPLinux: PartialRGB565 and native NV16 presentation; color accuracy is unverified.
CameraHardware: presentStock: AvailableFPLinux: PartialBF3A01; native 240×320 NV16, sensor rotation 270° and adjustable brightness. Brightness levels 0–6, initially 3, may change during capture and survive stream stops. Color accuracy and concurrent capture/codec use are unverified.

Storage

FeatureStock firmwareFPLinuxDetails
microSD data cardHardware: presentStock: AvailableFPLinux: PartialSDHC FAT32 and ext4 read/write in the RAM profile; insert the card before boot and keep it installed throughout the powered session. Hot-swap is not supported.
microSD hot swapStock: UnknownFPLinux: UnsupportedInsert the card before boot and keep it installed throughout the powered session.
microSD system cardStock: —FPLinux: UnsupportedOnly the RAM root is available.
Internal phone storageHardware: presentStock: —FPLinux: PartialRead-only raw NAND backup; no filesystem, writes or restore.

Power and sensors

FeatureStock firmwareFPLinuxDetails
CPU clock reportingStock: —FPLinux: VerifiedVerified on this phone.
Manual CPU frequency selectionStock: —FPLinux: Verified768 MHz and 1 GHz.
Charger statusHardware: presentStock: —FPLinux: PartialUSB input detection; battery charging is unverified.
Battery telemetryHardware: unknownStock: —FPLinux: UnsupportedThe fuel gauge is disabled.
SoC temperatureHardware: unknownStock: —FPLinux: UnsupportedThe thermal device is disabled.
Auxiliary ADCHardware: presentStock: —FPLinux: PartialRaw readings are available; channel calibration is unverified.
Real-time clockHardware: presentStock: —FPLinux: PartialRead/write and alarm wake from s2idle; battery retention is unverified.
Other battery functionsHardware: unknownStock: —FPLinux: UnsupportedNo battery level, battery temperature or charge-control interface is provided.
VibrationHardware: presentStock: AvailableThe stock phone provides vibration alerts; the actuator type is unconfirmed.FPLinux: UnsupportedNo vibration device is enabled.
Power-offStock: —FPLinux: Not testedThis function has not been tested on this phone.
SuspendStock: —FPLinux: PartialUSB-powered s2idle with RTC or red-handset wake restores the display and USB session; mounted ext4 storage remains usable after RTC wake.
RebootStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Applications

FeatureStock firmwareFPLinuxDetails
Image rotationStock: —FPLinux: PartialCPU path; ROTA is disabled.
JPEG codec and scalingStock: —FPLinux: PartialAvailable within the verified sizes and operations above.
Native image presentationStock: —FPLinux: PartialRGB565 and native NV16 presentation; color accuracy is unverified.
FPLinux: ARMADAStock: —FPLinux: UnsupportedNo force-feedback device is enabled.
Brightness controlStock: —FPLinux: Not testedApplication support has not been established on this phone.
TyrQuakeStock: —FPLinux: PartialGame data can use RAM or ext4 microSD storage; phone gameplay controls are supported.
FFmpeg software video decodingStock: —FPLinux: Not testedOptional CPU MPEG-4 Part 2, H.263 and H.264 decoding; device use is untested.

The RAM launcher prepares device data from this same handset for Bluetooth, FM radio and its audio settings. Do not substitute data from another phone.

Start the launcher from your ZIP, or run ./fplinux run maxvi-k15n-4g from a source checkout. Wait until it asks for the phone. Power the phone off, hold the left soft key, then connect USB while keeping the key pressed.

Terminal describes the shared controls. Insert a microSD data card before boot and leave it installed throughout the powered session; hot-swap is not supported. RAM files disappear when power is removed.

Use the shared Power interfaces within the checklist conditions.

Unmount data cards before disconnecting USB. If a battery is installed, remove and reinsert it before booting the phone normally.

  • Backlight: system levels 0–10, with level 0 turning the light off. Visible spacing between levels is unverified. The target uses /sys/class/backlight/maxvi-k15n-4g-backlight.