UNIWA V1000 4G
Source:targets/uniwa-v1000-4g
- Target:
uniwa-v1000-4g - Hardware code: not established
- Platform: Unisoc UMS9117
- Display: 320×240
- Configured build profiles:
default,microsd-uboot
Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.
Support checklist
Section titled “Support checklist”Each status applies to this phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.
Platform: Unisoc UMS9117.
Startup and access
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| RAM boot | Stock: — | FPLinux: Verified | RAM boot through D-pad Up and the USB loader, with a readable 320×240 landscape terminal. |
| Boot without the USB loader | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| USB networking | Stock: — | FPLinux: Verified | USB-NCM in RAM and microSD profiles. |
| SSH access | Stock: — | FPLinux: Verified | Authenticated SSH over the local USB connection in RAM and microSD profiles. |
| File transfer | Stock: — | FPLinux: Verified | USB file transfer to RAM, a microSD data card and the writable microSD system root. |
| USB host modeHardware: unknown | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Display and input
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Local terminal | Stock: — | FPLinux: Partial | Readable 320×240 landscape terminal in RAM and microSD profiles. The terminal returns after five-second idle RTC wake with a read-only microSD root. Full keypad input and exact color accuracy are unverified. |
| LCD backlightHardware: present | Stock: Available | FPLinux: Partial | Logical levels 0, 5 and 10 control raw backlight levels 0, 17 and 34 in RAM. Idle RTC sleep darkens the display and restores it with a read-only microSD root. Brightness calibration, physical keypad control and other panel variants are unverified. |
| Keypad backlightHardware: present | Stock: Available | FPLinux: Partial | Keypad illumination is present. Its supply can be switched in software; physical on/off transitions are unverified. |
| Host keyboard bridge | Stock: — | FPLinux: Not tested | USB host keyboard input is registered; its use on this target is unverified. |
| Indicator LEDsHardware: present | Stock: AvailableThe phone's RGB indicator signals missed calls and unread messages. | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| FlashlightHardware: present | Stock: Available | FPLinux: Unsupported | FPLinux provides no flashlight control. |
| GPU renderingHardware: unknown | Stock: — | FPLinux: Unsupported | No FPLinux GPU rendering path on this phone. |
Audio
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Headphone audioHardware: present | Stock: Available | FPLinux: Partial | An inserted 3.5 mm plug is detected. Stereo playback works with the tested three-contact headphones in the microSD profile. The tested four-contact headset plays each channel through both earpieces. Headset recording, other accessories, plug insertion/removal and automatic switching are unverified. |
| Speaker audioHardware: present | Stock: Available | FPLinux: Partial | Audible tone playback through the built-in speaker in the microSD profile. Speech and music quality are unverified. |
| FM radioHardware: present | Stock: Available | FPLinux: Partial | Band scan and timed headphone playback work in the RAM profile. Recognizable station reception and speaker output are unverified. |
| Built-in microphoneHardware: present | Stock: Available | FPLinux: Partial | Mono 48 kHz recording captures external tones in RAM and external tones and synthesized speech in the microSD profile; speech quality is unverified. |
| Wired-headset microphoneHardware: unknown | Stock: Unknown | FPLinux: Not tested | Wired-headset recording is unverified. |
| Automatic audio routing | Stock: Unknown | FPLinux: Unsupported | An inserted plug is detected. Plug insertion/removal and automatic output switching are unverified; select outputs explicitly. |
Bluetooth and networks
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| SIM hot swap | Stock: Unknown | FPLinux: Unsupported | FPLinux does not support cellular service or SIM cards. |
| Wi-FiHardware: unknown | Stock: Unknown | FPLinux: Unsupported | This feature is not supported in FPLinux. Whether the phone has the hardware is unknown. |
| Bluetooth pairing | Stock: Available | FPLinux: Verified | Classic pairing with a Linux PC in RAM and microSD profiles. |
| Bluetooth file transfer (OPP) | Stock: Unknown | FPLinux: Verified | Bidirectional OPP with a Linux PC in the RAM profile. |
| Bluetooth Internet (PAN) | Stock: — | FPLinux: Verified | PAN DHCP, bidirectional TCP transfer, external IPv4 ping, DNS and HTTPS with a Linux PC in the microSD profile; sustained operation and use after sleep are unverified. |
| Bluetooth audio to a Linux PC | Stock: — | FPLinux: Verified | Short 48 kHz stereo SBC playback and a repeated connection to a Linux PC in the microSD profile. Long playback and use after sleep are unverified. |
| Bluetooth headset audio (A2DP) | Stock: Unknown | FPLinux: Not tested | Physical Bluetooth headsets are unverified. |
| Bluetooth keyboard input | Stock: — | FPLinux: Partial | LE keyboard events from a software peer on a Linux PC reach Linux in the microSD profile. Physical keyboards and application input are unverified. |
| Bluetooth mouse input | Stock: — | FPLinux: Partial | LE pointer movement and button events from a software peer on a Linux PC reach Linux in the microSD profile. Physical mice and application input are unverified. |
| Mobile calls | Stock: Available | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| SMS | Stock: Available | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| Mobile data | Stock: Unknown | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| Infrared remote controlHardware: unknown | Stock: Unknown | FPLinux: Unsupported | FPLinux provides no infrared remote-control path. |
Camera and images
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| AP DMAengineHardware: unknown | Stock: — | FPLinux: Not tested | This function has not been tested on this phone. |
| Hardware image rotationHardware: present | Stock: — | FPLinux: Verified | NV16 quarter-turn rotation in the microSD profile, with output matching the CPU reference. |
| Hardware JPEG engineHardware: present | Stock: — | FPLinux: Verified | Hardware JPEG encoding and decoding at 640×480 and scaling to 320×240 in the microSD profile. |
| Native image presentationHardware: unknown | Stock: — | FPLinux: Not tested | On-phone image presentation is unverified. |
| CameraHardware: present | Stock: Available | FPLinux: Verified | BF20A6 native 640×480 NV16 in RAM and microSD profiles, with unrotated pixels. Continuous capture works in RAM; stream stop works in both profiles. Absolute color accuracy, exposure and other sensor controls are unverified; no preview or photo application. |
Storage
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| microSD data cardHardware: present | Stock: Available | FPLinux: Verified | Data-card reads and writes in the RAM profile; files persist after power is removed. Insert before boot and keep installed while powered; no hot-swap. |
| microSD hot swap | Stock: Unknown | FPLinux: Unsupported | Insert the card before boot and keep it installed throughout the powered session. |
| microSD system card | Stock: — | FPLinux: Verified | ext4 root grows to fill the card; installed packages and files persist after a cold start. Each start requires the USB loader; keep the card installed while powered. |
| Internal phone storageHardware: present | Stock: — | FPLinux: Partial | Read-only raw NAND backup and device-data preparation. No mounting, writing or restoration. |
Power and sensors
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| CPU clock reporting | Stock: — | FPLinux: Verified | Lower-bound clock estimates in the microSD profile. |
| Manual CPU frequency selection | Stock: — | FPLinux: Verified | Selection between 768 MHz and 1 GHz in the microSD profile; voltage and sustained-load behavior are unverified. |
| Charger statusHardware: present | Stock: — | FPLinux: Partial | Connected USB power and CDP source classification are reported. Disconnection detection and battery charging are unverified. |
| Battery telemetryHardware: present | Stock: — | FPLinux: Partial | Voltage, current and charge-counter interfaces are available. Battery measurements and calibrated accuracy are unverified; battery percentage is unavailable. |
| SoC temperatureHardware: present | Stock: — | FPLinux: Partial | Temperature readings respond in the microSD profile; accuracy is unverified. |
| Auxiliary ADCHardware: unknown | Stock: — | FPLinux: Not tested | This function has not been tested on this phone. |
| Real-time clockHardware: present | Stock: — | FPLinux: Partial | RTC reads and five-second alarm wake work in an idle microSD session with a read-only system root. Accuracy and retention without USB power are unverified. |
| Other battery functionsHardware: unknown | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| VibrationHardware: present | Stock: Unknown | FPLinux: Partial | The motor responds to bounded FF_RUMBLE pulses in the microSD profile. Haptic strength and operation with a battery are unverified. |
| Power-off | Stock: — | FPLinux: Not tested | This function has not been tested on this phone. |
| Suspend | Stock: — | FPLinux: Partial | Five-second idle s2idle with RTC wake returns to the same SSH session in the microSD profile with the system root read-only. Writable-root sleep, active peripherals, keypad wake and battery operation are unverified. |
| Reboot | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Applications
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Image rotation | Stock: — | FPLinux: Verified | Hardware NV16 quarter-turn rotation matches the CPU reference in the microSD profile. On-phone preview is unverified. |
| JPEG codec and scaling | Stock: — | FPLinux: Verified | Hardware JPEG encoding and decoding at 640×480 and scaling to 320×240 in the microSD profile. On-phone presentation is unverified. |
| Native image presentation | Stock: — | FPLinux: Not tested | On-phone image presentation is unverified. |
| FPLinux: ARMADA | Stock: — | FPLinux: Not tested | Application use on this phone is unverified. |
| Brightness control | Stock: — | FPLinux: Partial | Command-line brightness control at logical levels 0, 5 and 10 in RAM. The brightness application displays and changes the logical level; physical keypad control and brightness calibration are unverified. |
| TyrQuake | Stock: — | FPLinux: Partial | Native 320×240 landscape demo playback with a microSD system card. Physical game controls and full gameplay are unverified; there is no game sound. |
| FFmpeg software video decoding | Stock: — | FPLinux: Not tested | This function has not been tested on this phone. |
Before you start
Section titled “Before you start”The RAM launcher prepares device data from this same handset for Bluetooth, FM radio and its audio settings. Do not substitute another phone’s data.
Use the authenticated SSH connection over USB-NCM described in Connect from the PC for command input while full keypad operation is unverified. On-phone image presentation is unverified.
Boot key
Section titled “Boot key”Start the launcher from your ZIP, or run ./fplinux run uniwa-v1000-4g from a source checkout. Wait until it asks for the phone. Power the phone off, hold D-pad Up, then connect USB while keeping the key pressed.
Controls
Section titled “Controls”The held D-pad Up key is detected by Linux. The other physical keys and complete keypad input are unverified.
Storage and power
Section titled “Storage and power”Insert a microSD card before boot and keep it installed throughout the powered session; hot-swap is not supported. Every start, including a microSD system card, requires the PC loader. RAM files disappear when power is removed.
Use the shared Power interfaces within the checklist conditions. For sleep with a microSD system card, make the system root read-only and stop active peripherals first. Sleep with a writable root or a battery is unverified.
Before removing power, unmount data cards. With a microSD system card, use system-card shutdown on USB power and confirm that the system root is read-only before cutting power.
Hardware controls and limits
Section titled “Hardware controls and limits”Use Display and lights for brightness, keypad illumination and vibration, within the checklist conditions. Torch use is unverified.