Skip to content

INOI 244 Modern 4G

Source:targets/inoi-244-modern-4g

  • Target: inoi-244-modern-4g
  • Hardware code: not established
  • Platform: Unisoc UMS9117
  • Display: 240×320
  • Configured build profiles: default, microsd-uboot

Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.

Each status applies to this exact phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.

Stock-firmware details published under the 244 Modern Plus 4G name are not confirmed for this exact target. Its hardware and FPLinux results remain specific to the handset described here.

Platform: Unisoc UMS9117.

Startup and access

FeatureStock firmwareFPLinuxDetails
RAM bootStock: —FPLinux: VerifiedVerified on this phone.
Boot without the USB loaderStock: —FPLinux: UnsupportedA USB-loaded RAM bootstrap is required for every Linux boot.
USB networkingStock: —FPLinux: VerifiedVerified on this phone.
SSH accessStock: —FPLinux: VerifiedVerified on this phone.
File transferStock: —FPLinux: VerifiedTransfer to RAM is supported. Card detection at boot has not been verified.
USB host modeHardware: unknownStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Display and input

FeatureStock firmwareFPLinuxDetails
Local terminalStock: —FPLinux: Verified240×320 graphical terminal with phone-keypad input; RTC wake preserves the shell in USB-powered RAM sessions. Terminal use with a microSD system root, operation without USB power and physical external keyboards are untested.
LCD backlightHardware: presentStock: UnknownFPLinux: VerifiedSystem scale 0…10 works; level 0 turns the backlight off.
Keypad backlightHardware: presentStock: UnknownFPLinux: VerifiedBinary LED control; on and off are visible.
Host keyboard bridgeStock: —FPLinux: VerifiedVerified on this phone.
Indicator LEDsHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
FlashlightHardware: unknownStock: UnknownThe published flashlight listing belongs to the unconfirmed Plus variant.FPLinux: UnsupportedFPLinux provides no flashlight control.
GPU renderingHardware: unknownStock: —FPLinux: UnsupportedNo FPLinux GPU rendering path on this phone.

Audio

FeatureStock firmwareFPLinuxDetails
Headphone audioHardware: presentStock: UnknownFPLinux: VerifiedStereo S16_LE playback; the default device converts input to 48 kHz. Volume levels, equalizer and automatic level control come from this phone's saved audio profile.
Speaker audioHardware: presentStock: UnknownFPLinux: VerifiedRear loudspeaker with volume levels, equalizer and automatic level control from this phone's saved audio profile.
FM radioHardware: presentStock: UnknownPublished stock features describe the Plus variant; equivalence with this target is unconfirmed.FPLinux: VerifiedRAM profile: scan and headphone/speaker playback with EQ/ALC off. EQ-on playback checked on headphones only; speaker EQ and microSD FM not tested.
Built-in microphoneHardware: presentStock: UnknownFPLinux: VerifiedMono 48-kHz PCM recording.
Wired-headset microphoneHardware: unknownStock: UnknownFPLinux: Not testedWired-headset recording has not been tested on this phone.
Automatic audio routingStock: UnknownFPLinux: VerifiedInsert/remove selects the playback output in USB-powered RAM sessions; switching a playing signal can click.

Bluetooth and networks

FeatureStock firmwareFPLinuxDetails
SIM hot swapStock: UnknownFPLinux: UnsupportedFPLinux does not support cellular service or SIM cards.
Wi-FiHardware: unknownStock: UnknownFPLinux: UnsupportedThis function is not supported in FPLinux on this phone.
Bluetooth pairingStock: UnknownFPLinux: VerifiedPairing in RAM and microSD profiles.
Bluetooth file transfer (OPP)Stock: UnknownFPLinux: VerifiedBidirectional OPP in RAM and microSD profiles.
Bluetooth Internet (PAN)Stock: —FPLinux: VerifiedPAN Internet in RAM and microSD profiles.
Bluetooth audio to a Linux PCStock: —FPLinux: VerifiedSBC playback to a Linux PC sink in the RAM profile; reconnect is supported.
Bluetooth headset audio (A2DP)Stock: UnknownFPLinux: Not testedPhysical Bluetooth headsets have not been tested.
Bluetooth keyboard inputStock: —FPLinux: Not testedPhysical Bluetooth keyboard input has not been tested.
Bluetooth mouse inputStock: —FPLinux: Not testedPhysical Bluetooth mouse input has not been tested.
Mobile callsStock: UnknownFPLinux: UnsupportedCalls are not supported in FPLinux.
SMSStock: UnknownFPLinux: UnsupportedSMS is not supported in FPLinux.
Mobile dataStock: UnknownFPLinux: UnsupportedMobile data is not supported in FPLinux.
Infrared remote controlHardware: unknownStock: UnknownFPLinux: UnsupportedFPLinux provides no infrared remote-control path.

Camera and images

FeatureStock firmwareFPLinuxDetails
AP DMAengineHardware: presentStock: —FPLinux: PartialMemory copies and the fixed ROTA request; see platform limits.
Hardware image rotationHardware: presentStock: —FPLinux: VerifiedRGB, grayscale and two-plane YUV through V4L2 mem2mem.
Hardware JPEG engineHardware: presentStock: —FPLinux: VerifiedBaseline decode, fixed encode geometries and fixed NV16 scaler pairs.
Native image presentationHardware: presentStock: —FPLinux: PartialNative 240×320 NV16 or RGB565 transfers. Returns to the same terminal and shell; visible image fidelity is untested.
CameraHardware: presentStock: UnknownThe published camera listing belongs to the unconfirmed Plus variant.FPLinux: VerifiedBF30A2; 240×320 NV16 through V4L2 in the RAM profile. Camera with a microSD system root is unverified. Sensor rotation is 0°; the native geometry is accepted by hardware JPEG. Capture and codec jobs may run concurrently at native size, including through display updates, blanking and wake.

Storage

FeatureStock firmwareFPLinuxDetails
microSD data cardHardware: presentStock: UnknownFPLinux: PartialThe card stays installed from boot to shutdown; hot-swap is not supported. Card detection at boot has not been verified on this phone.
microSD hot swapStock: UnknownFPLinux: UnsupportedInsert the card before boot and keep it installed throughout the powered session.
microSD system cardStock: —FPLinux: PartialFAT32 boot files plus an ext4 system root; card initialization at boot is unverified.
Internal phone storageHardware: presentStock: —FPLinux: PartialRead-only raw NAND backup; no filesystem, writes or restore.

Power and sensors

FeatureStock firmwareFPLinuxDetails
CPU clock reportingStock: —FPLinux: VerifiedVerified on this phone.
Manual CPU frequency selectionStock: —FPLinux: PartialThe 768 MHz and 1 GHz settings are in the target build; switching on this phone has not been physically tested.
Charger statusHardware: presentStock: —FPLinux: PartialRead-only status is available; battery charging has not been tested.
Battery telemetryHardware: presentStock: —FPLinux: PartialVoltage, current and charge-counter interfaces are available; battery measurements have not been verified.
SoC temperatureHardware: presentStock: —FPLinux: PartialShared temperature interface enabled; physical accuracy has not been checked.
Auxiliary ADCHardware: presentStock: —FPLinux: PartialShared raw-channel interface enabled; physical inputs and accuracy have not been checked.
Real-time clockHardware: presentStock: —FPLinux: PartialRead/set time, one-shot alarms and RTC wake work in both profiles; no update interrupts or alarm power-on.
Other battery functionsHardware: unknownStock: —FPLinux: UnsupportedNo battery level, temperature or charge control is provided.
VibrationHardware: presentStock: AvailableStock vibration uses the rear speaker rather than a separate motor.FPLinux: PartialRear speaker vibration; headphone audio is muted meanwhile, and one continuous pulse lasts at most about three seconds.
Power-offStock: —FPLinux: PartialEstablish card safety before disconnecting USB power; battery-only power-off has not been tested.
SuspendStock: —FPLinux: Partials2idle with RTC/red-handset wake and Bluetooth. Sleep with a mounted card or card-backed swap is unverified with the current card initialization at boot.
RebootStock: —FPLinux: UnsupportedThis function is not supported in FPLinux on this phone.

Applications

FeatureStock firmwareFPLinuxDetails
Image rotationStock: —FPLinux: VerifiedExplicit CPU/ROTA selection and DRM preview. Returns to the same terminal and shell; visible image fidelity is untested.
JPEG codec and scalingStock: —FPLinux: VerifiedHardware decode, fixed encode and fixed half-scaling.
Native image presentationStock: —FPLinux: PartialDirect NV16 or CPU-converted RGB565 transfers. Returns to the same terminal and shell; visible image fidelity is untested.
FPLinux: ARMADAStock: —FPLinux: PartialPhysical light effects have not been tested.
Brightness controlStock: —FPLinux: VerifiedPhone-keypad control of levels 0…10; level 0 turns the backlight off.
TyrQuakeStock: —FPLinux: PartialGame data supports RAM and ext4 paths, including the system root, but card initialization at boot is unverified on this phone.
FFmpeg software video decodingStock: —FPLinux: Not testedOptional CPU MPEG-4 Part 2, H.263 and H.264 decoding; device use is untested.

The RAM launcher prepares device data from this same handset for Bluetooth, FM radio and its audio settings. Do not substitute data from another phone.

Start the launcher from your ZIP, or run ./fplinux run inoi-244-modern-4g from a source checkout. Wait until it asks for the phone. Power the phone off, hold *, then connect USB while keeping * pressed.

The red handset key, Red, is the power key.

Key Action
Red, short press Wakes the phone from suspend.
Red, held Power-off on battery has not been tested.

See the shared keypad bindings and application keys in Terminal.

  • The microSD slot is under the battery. Insert the card before you start FPLinux and leave it installed from boot to shutdown; hot-swap is not supported.
  • Card detection at boot has not been verified for data storage or the microSD system root.
  • File transfer from a PC works with RAM destinations. Transfer to a card requires it to be detected at boot, which is unverified here.

Battery-only power-off has not been tested. Use the session-ending procedure below. A short press of Red or an RTC alarm wakes the phone from s2idle; see Power for the shared controls. Sleep with a mounted card or card-backed swap has not been verified with the current card initialization at boot.

In the default RAM profile, unmount data cards before disconnecting USB. If a battery is installed, remove it and put it back before booting the phone normally.

  • Backlight: /sys/class/backlight/inoi244-backlight with the raw range 0–31, starting at 18. System levels 0–10 apply, starting at 7; level 0 turns the light off. Visible spacing is not calibrated; see Display and lights.
  • Vibration: the rear speaker provides vibration instead of a separate motor. Follow the shared speaker-vibration limits, including headphone muting and the continuous-pulse limit.