Skip to content

Glossary

The Unisoc chip used by several supported phones, also known by its reference name T117. See UMS9117 features.

The Unisoc chip used by the Xiaomi Qin 1s+. See SC9820E features.

The code shared by phones with the same chip. FPLinux has the ums9117 and sc9820e platforms.

The description of one exact phone model, and the name you pass to ./fplinux build and ./fplinux run, such as nokia-ta1618. A target is never used for a different model. See Phones.

The result for one function on one exact phone, with its tested conditions and remaining limits. See the phone status legend. Hardware presence is a separate fact.

Whether FPLinux provides a function on a particular platform. This does not establish a device result or support on every model. See Features.

The software the phone came with. Starting the phone normally, without the boot key, starts it.

The phone’s built-in flash memory, which holds the stock firmware. Targets with a read-only NAND interface can prepare device data and backups. Other targets provide no internal-storage access.

Radio firmware and calibration, Bluetooth records, FM settings and audio tuning from your own phone. FPLinux does not ship these inputs. Target-owned board initialization and Linux keymaps are separate. See Device data.

The PC side of a start: ./fplinux run in a source checkout, or fplinux.py run in a standalone archive. The shared runtime prepares required phone data on first use, sends FPLinux over USB and opens SSH. Targets without required phone data boot directly. Running the same command again reopens an authenticated live session. See Run FPLinux.

The key you hold while connecting USB to a powered-off phone so that it waits for a load instead of starting its stock firmware. Use the exact key listed on your phone page.

Code built into the chip that runs first. With the boot key held, it appears on the PC as USB device 1782:4d00 and accepts a load.

A small program that the loader sends first. It prepares the phone’s memory and receives the rest of the system.

The private network over the USB cable that the shell, file copies and the PC keyboard use once Linux runs. The phone then appears as USB device 0525:a4a6. See Connect from a computer.

The default build. It runs entirely from the phone’s RAM and forgets everything at power-off.

A build that keeps the Linux system on a microSD card, so packages and files persist. Each cold start still needs the PC loader. UMS9117 uses U-Boot to start Linux from the card; SC9820E loads Linux over USB and mounts the card as its root. See microSD system card.

The boot mode a build is made for: the RAM system by default, or a microSD system card with microsd-uboot on supported UMS9117 targets and microsd-root on Qin. Check your phone’s supported profiles and pass the same --profile to every command for that build.

release by default, or debug, which adds kernel diagnostics. See Debugging.

An application delivered as an APK file and installed on a running phone with apk. See Optional packages.

A packaged FPLinux for one phone that runs without a source checkout or build tools. See Standalone archive.