INOI 240 Modern 4G
Source:targets/inoi-240-modern-4g
- Target:
inoi-240-modern-4g - Hardware code: not established
- Platform: Unisoc UMS9117
- Display: 128×160
- Configured build profiles:
default,microsd-uboot
Configured profiles describe build availability. The checklist below states which functions work and the limits for each profile.
Support checklist
Section titled “Support checklist”Each status applies to this exact phone and the conditions in its note. See Support status for the meaning of the labels and common limitations.
Platform: Unisoc UMS9117.
Startup and access
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| RAM boot | Stock: — | FPLinux: Verified | Verified on this phone. |
| Boot without the USB loader | Stock: — | FPLinux: Unsupported | A USB-loaded RAM bootstrap is required for every Linux boot. |
| USB networking | Stock: — | FPLinux: Verified | Verified on this phone. |
| SSH access | Stock: — | FPLinux: Verified | Verified on this phone. |
| File transfer | Stock: — | FPLinux: Verified | Transfer to RAM is supported. Card detection at boot has not been verified; FAT32 transfers are unverified. |
| USB host modeHardware: unknown | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Display and input
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Local terminal | Stock: — | FPLinux: Verified | 128×160 graphical terminal with phone-keypad input; RTC wake preserves the shell in USB-powered RAM sessions. Terminal use with a microSD system root, operation without USB power and physical external keyboards are untested. |
| LCD backlightHardware: present | Stock: Available | FPLinux: Verified | System scale 0…10 works; level 0 turns the backlight off. |
| Keypad backlightHardware: present | Stock: Unknown | FPLinux: Verified | Binary LED control; on and off are visible. |
| Host keyboard bridge | Stock: — | FPLinux: Verified | Verified on this phone. |
| Indicator LEDsHardware: unknown | Stock: Unknown | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| FlashlightHardware: present | Stock: Available | FPLinux: Unsupported | FPLinux provides no flashlight control. |
| GPU renderingHardware: unknown | Stock: — | FPLinux: Unsupported | No FPLinux GPU rendering path on this phone. |
Audio
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Headphone audioHardware: present | Stock: Available | FPLinux: Verified | Stereo S16_LE playback; the default device converts input to 48 kHz. Volume levels, equalizer and automatic level control come from this phone's saved audio profile. |
| Speaker audioHardware: present | Stock: Available | FPLinux: Verified | Rear loudspeaker with volume levels, equalizer and automatic level control from this phone's saved audio profile. |
| FM radioHardware: present | Stock: Available | FPLinux: Verified | RAM profile: scan and headphone/speaker playback with EQ/ALC off. EQ-on playback and microSD FM not tested. |
| Built-in microphoneHardware: present | Stock: Available | FPLinux: Verified | Mono 48-kHz PCM recording. |
| Wired-headset microphoneHardware: present | Stock: Unknown | FPLinux: Verified | Four-contact wired-headset recording; select the Headset source manually. |
| Automatic audio routing | Stock: Unknown | FPLinux: Verified | Insert/remove selects the playback output in USB-powered RAM sessions; switching a playing signal can click. |
Bluetooth and networks
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| SIM hot swap | Stock: Unknown | FPLinux: Unsupported | FPLinux does not support cellular service or SIM cards. |
| Wi-FiHardware: unknown | Stock: UnavailableStock Wi-Fi is listed as unavailable; physical radio presence remains unknown. | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
| Bluetooth pairing | Stock: Unknown | FPLinux: Verified | Pairing in RAM and microSD profiles. |
| Bluetooth file transfer (OPP) | Stock: Unknown | FPLinux: Verified | Bidirectional OPP in RAM and microSD profiles. |
| Bluetooth Internet (PAN) | Stock: — | FPLinux: Verified | PAN Internet in RAM and microSD profiles. |
| Bluetooth audio to a Linux PC | Stock: — | FPLinux: Not tested | A2DP audio has not been tested on this phone. |
| Bluetooth headset audio (A2DP) | Stock: Available | FPLinux: Not tested | Physical Bluetooth headsets have not been tested. |
| Bluetooth keyboard input | Stock: — | FPLinux: Not tested | Physical Bluetooth keyboard input has not been tested. |
| Bluetooth mouse input | Stock: — | FPLinux: Not tested | Physical Bluetooth mouse input has not been tested. |
| Mobile calls | Stock: Available | FPLinux: Unsupported | Calls are not supported in FPLinux. |
| SMS | Stock: Unknown | FPLinux: Unsupported | SMS is not supported in FPLinux. |
| Mobile data | Stock: Unknown | FPLinux: Unsupported | Mobile data is not supported in FPLinux. |
| Infrared remote controlHardware: unknown | Stock: Unknown | FPLinux: Unsupported | FPLinux provides no infrared remote-control path. |
Camera and images
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| AP DMAengineHardware: present | Stock: — | FPLinux: Partial | Memory copies and the fixed ROTA request; see platform limits. |
| Hardware image rotationHardware: present | Stock: — | FPLinux: Verified | RGB, grayscale and two-plane YUV through V4L2 mem2mem. |
| Hardware JPEG engineHardware: present | Stock: — | FPLinux: Verified | Baseline decode, fixed encode geometries and fixed NV16 scaler pairs. |
| Native image presentationHardware: present | Stock: — | FPLinux: Partial | Native 128×160 NV16 or RGB565. Returns to the same terminal and shell; visible image fidelity is untested. |
| CameraHardware: present | Stock: Available | FPLinux: Verified | BF30A2; 240×320 NV16 through V4L2 in the RAM profile. Camera with a microSD system root is unverified. Sensor rotation is 0°; the native geometry is accepted by hardware JPEG. Capture and codec jobs may run concurrently at native size, including through display updates, blanking and wake. |
Storage
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| microSD data cardHardware: present | Stock: Available | FPLinux: Partial | The card stays installed from boot to shutdown; hot-swap is not supported. Card detection at boot has not been verified on this phone. |
| microSD hot swap | Stock: Unknown | FPLinux: Unsupported | Insert the card before boot and keep it installed throughout the powered session. |
| microSD system card | Stock: — | FPLinux: Partial | FAT32 boot files plus an ext4 system root; card initialization at boot is unverified. |
| Internal phone storageHardware: present | Stock: — | FPLinux: Partial | Read-only raw NAND backup; no filesystem, writes or restore. |
Power and sensors
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| CPU clock reporting | Stock: — | FPLinux: Verified | Verified on this phone. |
| Manual CPU frequency selection | Stock: — | FPLinux: Verified | Switching between 768 MHz and 1 GHz works on this phone. |
| Charger statusHardware: present | Stock: — | FPLinux: Partial | External-input status is available; battery charging has not been tested. |
| Battery telemetryHardware: present | Stock: — | FPLinux: Partial | Voltage, current and charge counter respond; measurements with a battery have not been tested. |
| SoC temperatureHardware: present | Stock: — | FPLinux: Partial | Temperature readings are available; physical accuracy has not been checked. |
| Auxiliary ADCHardware: present | Stock: — | FPLinux: Partial | Raw-channel interface enabled; physical inputs and accuracy have not been checked. |
| Real-time clockHardware: present | Stock: — | FPLinux: Partial | Read/set time, one-shot alarms and RTC wake work in both profiles; no update interrupts or alarm power-on. |
| Other battery functionsHardware: unknown | Stock: — | FPLinux: Unsupported | No battery level, temperature or charge control is provided. |
| VibrationHardware: present | Stock: AvailableStock vibration uses the rear speaker rather than a separate motor. | FPLinux: Partial | Rear speaker vibration; headphone audio is muted meanwhile, and one continuous pulse lasts at most about three seconds. |
| Power-off | Stock: — | FPLinux: Partial | Establish card safety before disconnecting USB power; battery-only power-off has not been tested. |
| Suspend | Stock: — | FPLinux: Partial | s2idle with RTC/red-handset wake and Bluetooth. Sleep with a mounted card or card-backed swap is unverified with the current card initialization at boot. |
| Reboot | Stock: — | FPLinux: Unsupported | This function is not supported in FPLinux on this phone. |
Applications
| Feature | Stock firmware | FPLinux | Details |
|---|---|---|---|
| Image rotation | Stock: — | FPLinux: Verified | Explicit CPU/ROTA selection and DRM preview. Returns to the same terminal and shell; visible image fidelity is untested. |
| JPEG codec and scaling | Stock: — | FPLinux: Verified | Hardware decode, fixed encode and fixed half-scaling. |
| Native image presentation | Stock: — | FPLinux: Partial | Direct NV16 or CPU-converted RGB565 presentation. Returns to the same terminal and shell; visible image fidelity is untested. |
| FPLinux: ARMADA | Stock: — | FPLinux: Partial | Runs in both profiles; physical display and light effects have not been tested. |
| Brightness control | Stock: — | FPLinux: Verified | Phone-keypad control of levels 0…10; level 0 turns the backlight off. |
| TyrQuake | Stock: — | FPLinux: Partial | Game data supports RAM and ext4 paths, including the system root, but card initialization at boot is unverified on this phone. |
| FFmpeg software video decoding | Stock: — | FPLinux: Not tested | Optional CPU MPEG-4 Part 2, H.263 and H.264 decoding; device use is untested. |
Before you start
Section titled “Before you start”The RAM launcher prepares device data from this same handset for Bluetooth, FM radio and its audio settings. Do not substitute data from another phone.
Boot key
Section titled “Boot key”Start the launcher from your ZIP, or run ./fplinux run inoi-240-modern-4g from a source checkout. Wait until it asks for the phone. Power the phone off, hold *, then connect USB while keeping * pressed.
Controls
Section titled “Controls”The red handset key, Red, is the power key.
| Key | Action |
|---|---|
| Red, short press | Wakes the phone from suspend. |
| Red, held | Power-off on battery has not been tested. |
See the shared keypad bindings and application keys in Terminal.
Storage
Section titled “Storage”- The microSD slot is under the battery. Insert the card before you start FPLinux and leave it installed from boot to shutdown; hot-swap is not supported.
- Card detection at boot has not been verified for data storage or the microSD system root.
- File transfer from a PC works with RAM destinations. Transfer to a card requires it to be detected at boot, which is unverified here; FAT32 transfers have not been verified.
Battery-only power-off has not been tested. Use the session-ending procedure below. A short press of Red or an RTC alarm wakes the phone from s2idle; see Power for the shared controls. Sleep with a mounted card or card-backed swap has not been verified with the current card initialization at boot.
End the session
Section titled “End the session”In the default RAM profile, unmount data cards before disconnecting USB. If a battery is installed, remove it and put it back before booting the phone normally.
Hardware details and limits
Section titled “Hardware details and limits”- Backlight:
/sys/class/backlight/inoi240-backlightwith the raw range 0–31, starting at 18. System levels 0–10 apply, starting at 7; level 0 turns the light off. Visible spacing is not calibrated; see Display and lights. - Vibration: the rear speaker provides vibration instead of a separate motor. Follow the shared speaker-vibration limits, including headphone muting and the continuous-pulse limit.